Customized Factory Large Square CP Glasses Optical Frame
- group name
- Custom Women Optical Frame
- Min Order
- 1 piece
- brand name
- READSUN Optical
- model
- OCP332039
- Nearest port for product export
- SHANGHAI, NINGBO, GUANGZHOU, SHENZHEN
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES
- Acceptable payment methods
- T/T, L/C, D/P D/A, MoneyGram, Credit Card, Westem Union, Cash
- update time
- Mon, 26 Oct 2026 22:22:30 GMT
Paramtents
SIZE 52-18-142
Certificate CE,FDA
Logo Support
Packaging Custom design can be provided
Packging & Delivery
-
Min Order1 piece
Briefing
Detailed
A prescription-ready front produced by injection, so the shape holds across the run.
Overview
This optical front is built around a shape statement: a heavy brow, a defined eye wire and a temple that carries the colour through. The front is made in CP, and the lens specification is a demo lens, with the final lens specified at order. It is supplied as an OEM/ODM frame for optical chains, private-label brands and distributors who need a prescription-ready front that photographs well and repeats exactly from sample to bulk.
For a buyer, the useful part is the repeatability. Colour is matched against an approved swatch before the run starts, the hinge is tested at the assembly stage rather than at packing, and the front geometry is checked against the sample so a reorder does not arrive with a shape that has drifted. The catalogue lists this model under five search terms: optical frame, cp glasses optical frame, large square cp glasses, customized factory and factory large square. They cover platform, fit and frame family, and all five resolve to model OCP332039, so a request placed under any of them reaches the same tooling and the same specification sheet.
Key Features
The four points below are the ones buyers usually test on a sample: material behaviour, fit geometry, optical performance and the customisation boundary.
Front Material and Finish
CP is a cellulose-ester plastic that flows well in injection tooling, so the front and temple come out with consistent wall thickness and no sink marks on the brow. It takes deep colour evenly through the section rather than only at the surface, which keeps a red or black frame from showing pale edges after polishing.
Hinge, Temple and Fit
The front carries a defined brow and a thin eye wire, so the lens is held under tension at the rim rather than only at the top. That is what keeps a prescription lens from rotating in the frame after glazing.
Lens Fitting and Optical Stability
The front is deep enough to take a range of lens thicknesses, including a high minus edge, without the lens standing proud of the rim. Buyers can therefore offer the shape across a wider prescription range.
Colour, Logo and Packing
Colour, logo and packing are fixed at sampling, which means the reorder repeats the approved version instead of re-interpreting it. Minimum order quantity and price breaks are confirmed at quotation stage, because they move with colour count and packing format.
Product Showcase
Photographs below are the approved sample set for model OCP332039: front, angle, temple detail and colour reference. They are the images used for buyer approval, so a reorder is matched against the same reference.
Specifications
Values below come from the product file for this model. Where a field is not fixed in the file, it is marked as confirmable rather than filled with a nominal figure.
| Model No. | OCP332039 |
|---|---|
| Category | Custom Women Optical Frame |
| Frame Material | CP (cellulose propionate), injection moulded |
| Lens | Demo lens; final lens specified at order |
| Size | 52-18-142 (lens-bridge-temple, mm) |
| Colour | Colour range confirmed at quotation stage |
| Customization | Customizable on request |
| MOQ | Confirmed at quotation stage |
| Certification | Confirmed at quotation stage |
| Packing | Packing configuration confirmed at quotation stage |
OEM & ODM Customization
Customisation is handled at the tooling and sampling stage rather than at packing, because colour and geometry decisions made late are the ones that create a mismatch between the approved sample and the bulk. The list below is the working boundary for this model: anything inside it is quoted as a variant, anything outside it is quoted as a new development.
- Front colour matched to a Pantone or physical swatch before moulding, with a colour chip retained for the reorder.
- Logo applied by moulding, pad printing or laser marking, depending on where the mark sits and how the material takes ink.
- Lens specified at order: tint, coating and, where the brief calls for it, blue-light filtering.
- Temple length and tip curvature adjusted at sampling so the frame fits the target market rather than the sample head.
- Packing configured to the buyer brief: polybag, pouch, case, carton count and barcode label.
Manufacturing & Quality Control
Production runs through four checkpoints, and each one can stop a batch. The sequence is the same for a trial order and for a repeat run, so a buyer who approves a sample knows which checks the bulk will pass through.
1. Incoming Material Inspection
Resin, sheet and temple wire arrive with a batch record. Colour is checked against the approved swatch under daylight, and magnetic inserts, where the model uses them, are tested for pull before the batch is released to moulding.
2. Moulding and Frame Assembly
Front and temple come off the tool, are trimmed, then matched as a pair. Hinge screws are set to a fixed torque and thread-locked, so the fold tension is the same on the first frame and the last.
3. Surface Finishing and Optical Check
Surfaces are polished and, where specified, coated. Each frame is checked for sink marks, colour step at the hinge and lens seat flatness, and a sample is measured against the approved geometry.
4. Packing and Pre-Shipment Sampling
Packing follows the approved carton configuration, and each carton carries a model and colour label. A sampling check is run on finished cartons for hinge tension, colour and logo position before shipment is released.
The full inspection standard is described on the quality control page, and prototype lead times are set out under rapid prototyping.
Applications
Model OCP332039 is ordered by buyers in the following channels. The list is not exclusive, but it describes where the shape, price point and packing have already been placed.
- Optical chains building a coherent wall from one tooling family
- Private-label brands specifying colour, logo and packing
- Distributors supplying independent opticians with a design-led front
- Online prescription retailers who need a frame that photographs well
- Buying groups adding a bold shape to a conservative range
- Importers who need the same geometry repeated across reorders
For the wider assortment built on the same specification, see the women optical frame range.
FAQ
What is the minimum order quantity for this model?
The product file does not fix an MOQ for this model, so the quantity is confirmed at quotation stage against the chosen colour count and packing. Colour and logo customisation is quoted against the same quantity, so a trial order and a repeat order use one price ladder.
How long does sampling take, and what is needed to start?
Sampling starts once the target colour, logo position and lens specification are confirmed. A stock front can usually be shown from existing samples, while a new colour or a new logo needs a made-up sample. The exact sampling window is confirmed at quotation stage, together with the courier cost and the sample charge, which is credited against the bulk order.
Can the logo and packing be customised?
Logo and packing customisation are available; the exact method depends on the surface the mark sits on and is confirmed at quotation stage. Packing follows the approved carton configuration, and a buyer can specify polybag, pouch or case before the run is released. Artwork is checked on a proof before production, so a spelling or position error is caught before the tooling is touched.
Start Your Custom Order
Send the colour reference, the logo position and the lens type, and a quotation with sampling options comes back against this front. The women optical frame range shows the other fronts produced from the same tooling family. Model OCP332039, MOQ Confirmed at quotation stage, certification Confirmed at quotation stage. Send the brief and the specification sheet comes back with sampling, packing and price breaks.